Last
Revision:
4 Extreme Health 0 3 High Fire 0 1 Slight Other0 0 - Least
Emergency CHEMTREC 800-424-9300
HMIS Hazard
Phones:
SECTION 1 - MATERIAL IDENTIFICATION
NAME: INSTANT STARCH
SYNONYMS:
SECTION 2 -
HAZARDOUS INGREDIENTS
NA
SECTION 3 CHEMICAL AND PHYSICAL PROPERTIES
Appearance: White powder Boiling Point (oF): NA
Odor: Odorless Melting Point (oF): NA
pH: NA Specific Gravity (H2O=1 @ 70oF): NA
Water solubility: Cold-Insoluble Hot-Gelatinizes Vapor Pressure, mm Hg, 20oC: NA NA
Vapor Density (air=1): NA Volatile Organic (VOC) content: NA
Evaporation Rate (Butyl Acetate = 1) NA
SECTION 4 FIRE AND EXPLOSION HAZARDS
Flash Point (Method): 360 570C Explosive Limits: Lower 70 mg/L Upper None
Flammable Limits: None Auto Ignition Temperature: None
Extinguishing Media: Water, ansul dry chemical, fire extinguisher
Special Fire Fighting Procedures and Hazards: Avoid creating dust that could cause secondary explosion
Unusual Fire & Explosion Hazards: Explosive in specific dust concentrations dust precaution required.
SECTION 5 REACTIVITY INFORMATION
Stable: X Unstable: Hazardous Polymerization: Occurs: Does not Occur: X
Conditions to Avoid: Excessive dust concentrations
Materials to Avoid: None known.
Decomposition Products: Excessive dust concentrations.
Instant Starch Page
2
SECTION 6 HEALTH HAZARDS PROTECTIVE MEASURES FIRST AID
Carcinogen: No
EYES: Mild eye irritant. Use chemical goggles when handling this product. In the event of contact flush with water for 15 minutes Get medical attention if symptoms develop.
SKIN: Not likely to cause any adverse effect. Wash thoroughly with water.
INHALATION: Dust can cause irritation of the respiratory system.
INGESTION: Not likely to cause any adverse effects. Drink large quantities of water.
IN ALL CASES: GET PROMPT MEDICAL ATTENTION IF ADVERSE EFFECTS PERSIST
PRIMARY ROUTES OF ENTRY: Skin, eyes, inhalation, ingestion.
HYGIENE: No special precautions are required
SECTION 7 PRECAUTIONS FOR SAFE HANDLING, STORAGE AND USE
SPILLS AND LEAKS: Contain to prevent loss to the environment. Collect excess material. Flush
residual material to a sanitary sewer.
STORAGE AND HANDLING: Keep containers tightly closed. Store at ambient temperatures.
WASTE DISPOSAL: Follow recommendations of local, state and federal regulations.
EMPTY CONTAINERS: Rinsewith water. Send to a recycling center or return to Wausau Chemical Corporation.
SECTION 8 REGULATORY INFORMATION
DOT SHIPPING DESCRIPTION: None
LABEL REQUIRED None
The
information contained herein is given in good faith, but no warranty,
representation, inducement or license of any kind is made, except that the
information is accurate to the best of Wausau Chemical Corporations
knowledge, or is obtained from sources believed by Wausau Chemical
Corporation to be reliable and accurate. Wausau Chemical Corporation does
not assume any legal responsibility for use or reliance upon the
information being furnished. Customers are encouraged to conduct their own
tests. Before using any product, read the container label directions as
well as the Material Safety Data Sheet.
ND Not Determined NA Not Applicable NE Not Established