Last
Revision:
4 Extreme Health 3 3 High Fire 0 2 Moderate Reactivity 1 1 Slight Other 0 - Least
Emergency CHEMTREC 800-424-9300
HMIS Hazard
Phones:
SECTION 1 - MATERIAL IDENTIFICATION
NAME: SHC-FOAMING ALKALI
SYNONYMS: High foaming alkaline cleaner
SECTION 2 -
HAZARDOUS INGREDIENTS
Sodium Hydroxide 131-73-2 20% 2 mg/m3 NO
Potassium Hydroxide 1310-58-3 9% 2 mg/m3 NO
Diethylene glycol methyl ether 111-77-3 4% NE YES
Surfactants Blend 5% NE NO
SECTION 3 CHEMICAL AND PHYSICAL PROPERTIES
Appearance: Clear dark liquid Boiling Point (oF): ND
Odor: Slight Freezing Point (oF): ND
pH: 14 as is; 12 for a 1% solution Specific Gravity (H2O=1): 1.320
Water solubility: Complete Vapor Pressure, mm Hg, 20oC: ND
Vapor Density (air=1): ND Volatile Organic (VOC) content: NA
Evaporation Rate (Butyl Acetate = 1) : ND
SECTION 4 FIRE AND EXPLOSION HAZARDS
Flash Point (Method): NA Flammable Limits: Lower NA Upper NA
Auto Ignition Temperature: NA
Extinguishing Media: Water Fog
Special Fire Fighting Procedures and Hazards: Use NIOSH certified gas mask or self-contained breathing apparatus
Unusual Fire & Explosion Hazards: Acid materials will create a violent reaction with heat.
SECTION 5 REACTIVITY INFORMATION
Stable: Yes Hazardous Polymerization Does not Occur
Conditions to Avoid: High temperatures, exposure to light, traces of catalytic metals (nickel, copper, iron, cobalt, magnesium), excess alkalinity.
Materials to Avoid: Acids.
Decomposition Products: Not known.
SHC-Foaming Alkali Page
2
SECTION 6 HEALTH HAZARDS PROTECTIVE MEASURES FIRST AID
Carcinogen: Not a carcinogen
EYES: Extremely corrosive and irritating to the eyes. Use chemical goggles when handling this product. In the event of contact flush with water for 15 minutes. Get medical attention if symptoms develop.
SKIN: Corrosive to the skin. Use neoprene gloves and rubber apron. In the event of contact wash with water for 15 minutes. Seek medical attention if symptoms develop.
INHALATION: Inhalation of fumes is extremely irritating to the mucous membranes. Get to fresh air. Use adequate ventilation when using this product.
INGESTION: Ingestion causes extreme irritation to membranes of mouth, throat and will cause stomach pain and ulceration. DO NOT INDUCE VOMITING. Drink large quantities of milk or gelatin solution if available otherwise water. Get medical attention immediately.
IN ALL CASES: GET PROMPT MEDICAL ATTENTION IF EFFECTS PERSIST
PRIMARY ROUTES OF ENTRY: Skin, eyes, and inhalation, ingestion
HYGIENE: Wash
hands and face before eating or drinking.
SECTION 7 PRECAUTIONS FOR SAFE HANDLING, STORAGE AND USE
SPILLS AND LEAKS: Contain if possible. Collect excess material. Rinse residual with water to a sanitary sewer.
STORAGE AND HANDLING: Store at ambient temperatures.
WASTE DISPOSAL: Dispose of in accordance with local, state and federal regulations.
EMPTY CONTAINERS: Rinse with water. Send to a recycler or return to Wausau Chemical Corporation.
SECTION 8 REGULATORY INFORMATION
DOT SHIPPING DESCRIPTION: Corrosive liquid, basic, inorganic, N.O.S., (Sodium Hydroxide, Potassium Hydroxide), 8, UN3266, PG II
LABEL REQUIRED: Corrosive
The
information contained herein is given in good faith, but no warranty,
representation, inducement or license of any kind is made, except that the
information is accurate to the best of Wausau Chemical Corporations
knowledge, or is obtained from sources believed by Wausau Chemical
Corporation to be reliable and accurate. Wausau Chemical Corporation does
not assume any legal responsibility for use or reliance upon the
information being furnished. Customers are encouraged to conduct their own
tests. Before using any product, read the container label directions as
well as the Material Safety Data Sheet.
ND Not Determined NA Not Applicable NE Not Established