Last
Revision:
4 Extreme Health 2 3 High Fire 0 2 Moderate Reactivity 1 1 Slight Other 0 - Least
Emergency CHEMTREC 800-424-9300
HMIS Hazard
Phones:
SECTION 1 - MATERIAL IDENTIFICATION
NAME: SODIUM
METABISULFITE ANHYDROUS
FORMULA: Na2S2O5 M.W. = 189.13
SYNONYMS: Sodium Pyrosulfite; Sodium Bisulfite Anhydrous
MANUFACTURED BY: BASF Corp
SECTION 2 -
HAZARDOUS INGREDIENTS
Sodium Metabisulfite 7681-57-4 >98% 5 mg/m3 NO
Sulfuric Acid, Monosodium <1.0% NE NO
SECTION 3 CHEMICAL AND PHYSICAL PROPERTIES
Appearance: White powder Boiling Point (oF): NA
Odor: None Melting Point (oF): Decomposes at 302
pH: NA Specific Gravity (H2O=1 @ 70oF): 1 to 1.20 g/cc
Water solubility: Very soluble Vapor Pressure, mm Hg, 20oC: NA
Vapor Density (air=1) : NA Volatile Organic (VOC) content: NA
Evaporation Rate (Butyl Acetate = 1) NA
SECTION 4 FIRE AND EXPLOSION HAZARDS
Flash Point (Method): None Explosive Limits: Lower None Upper None
Flammable Limits: None Auto Ignition Temperature: None
Extinguishing Media: Appropriate for the surrounding fire.
Special Fire Fighting Procedures and Hazards: Self contained breathing apparatus.
Unusual Fire & Explosion Hazards: Decomposes to sulfur dioxide gas and hazardous residue.
SECTION 5 REACTIVITY INFORMATION
Stable: X Unstable: Hazardous Polymerization: Occurs: Does not Occur: X
Conditions to Avoid: Excess heat, moisture.
Materials to Avoid: Acids, Strong oxidizing agents. Nitrates. Nitrites.
Decomposition Products: Sulfur oxides. Sulfur dioxide gas. Incompatible with acids.
Sodium Metabisulfite Anhydrous Page 2
SECTION 6 HEALTH HAZARDS PROTECTIVE MEASURES FIRST AID
Carcinogen: No
EYES: Can cause eye irritation and/or burns. Use chemical goggles when handling this product. Do not use contact lenses. In the event of contact flush with water for 15 minutes. Get medical attention if symptoms develop.
SKIN: Can cause skin irritation on repeated or prolonged contact. Use neoprene or rubber gloves and apron when handling this product. In the event of contact wash with water for 15 minutes. Remove contaminated clothing. Get medical attention if symptoms develop.
INHALATION: Dust can cause irritation of the respiratory system, chest pains, difficulty in breathing, and pulmonary edema. Excessive amounts can cause death. May cause severe or deadly allergic reactions in some asthmatics or sensitive individuals.
INGESTION: Irritable to the mouth, esophagus and mucous membranes. Large doses may cause violent colic, diarrhea, depression and death. May cause severe or deadly allergic reactions in some asthmatics or sensitive individuals. Drink large amounts of water. Induce vomiting. Get immediate medical attention.
IN ALL CASES: GET PROMPT MEDICAL ATTENTION IF ADVERSE EFFECTS PERSIST
PRIMARY ROUTES OF ENTRY: Skin, eyes, inhalation, ingestion.
HYGIENE: Wash
hands and face before eating or drinking.
SECTION 7 PRECAUTIONS FOR SAFE HANDLING, STORAGE AND USE
SPILLS AND LEAKS: Contain to prevent loss to the environment. Collect excess material. Flush residual material to a sanitary sewer.
STORAGE AND HANDLING: Keep containers tightly closed. Store at ambient temperatures.
WASTE DISPOSAL: Follow recommendations of local, state and federal regulations.
EMPTY CONTAINERS: Send to a recycling center or return to Wausau Chemical Corporation.
SECTION 8 REGULATORY INFORMATION
DOT SHIPPING DESCRIPTION: NONE
LABEL REQUIRED NONE
The
information contained herein is given in good faith, but no warranty,
representation, inducement or license of any kind is made, except that the
information is accurate to the best of Wausau Chemical Corporations
knowledge, or is obtained from sources believed by Wausau Chemical
Corporation to be reliable and accurate. Wausau Chemical Corporation does
not assume any legal responsibility for use or reliance upon the
information being furnished. Customers are encouraged to conduct their own
tests. Before using any product, read the container label directions as
well as the Material Safety Data Sheet.
ND Not Determined NA Not Applicable NE Not Established